More Sugru projects

I use Sugru around the home and car a lot, both indoors and outdoors.  

So here's a few more simple improvements made around the house. 

First up, the classic charging cable strengthening (iPad 2) - no mystery here. 

With a 2 year old about, the iPad cable needs a bit of strengthening  

With a 2 year old about, the iPad cable needs a bit of strengthening  

Next up, finger grips for a small remote control to help stop it sliding out of the hand. 

Sugru finger grips  

Sugru finger grips  

Finally, the ultimate tool you can never find: a pointy sticky sharpish thing to perform resets and extract SIM cards. This wee metal pin came as the on/off control with my solar lights - but a paper clip would do the same job. ​

Device reset tool

Device reset tool

Add a Sugru handle - voila! ​

Two new Sugru projects

Sugru has become my go-to DIY material. First I consider if the job can be done with Sugru, and if it can, I will.  

Magnets add a an extra dimension of usefulness - and although you can buy Sugru branded magnet packs, it is in fact cheaper to buy alternatives in bulk.  

The first part of this project is a magnetic mount for a solar step light on our back path. Not much point wiring up a light when this location faces South west and gets oodles of sunlight.  

The magnetic mounts mean no drilling, some adjustment possible in the exact position of the light, and of course completely undoable without damage. The solar light is metallic and will stick without modification. Quick, clean, simple, no tools! 

Sugru used to create magnetic mounts.  

Sugru used to create magnetic mounts.  

Part 2 of the project is to position the mount for my new netatmo outdoor sensor. It's just a plastic clip with a lug on it.  As it has no screw holes, Sugru is perfect to mount it.  The ideal position is under the front porch canopy.  

Netatmo internet connected weather station.  

Netatmo internet connected weather station.  

I used white Sugru and once afixed stuck some of the render chips back on top of it, so you can hardly see it. Very pleased with the result. The netatmo sensor just slides onto the lug. Again, quick, clean, simple, no drilling, no damage! I love Sugru! 

Netatmo mount on render/chippings.  

Netatmo mount on render/chippings.